Wenn Sie ein widerstandsfähiges Kunststoffprofil benötigen, ist der Werkstoff Polyphenylensulfid die perfekte Lösung für Sie. Ein PPS-Kunststoffprofil hält hohen Temperaturen, Druck und der Einwirkung von aggressiven chemischen Substanzen stand. Dieser Hochleistungskunststoff bietet sich vor allem für Anwendungen in den Branchen Automobil, Elektronik, Luftfahrt und Gebäudeausstattung an. Alle notwendigen Normen und Spezifikationen werden von ihm in diesen Bereichen umfassend erfüllt. Dieser Kunststoff ist von Haus aus flammwidrig und somit ein V-0 klassifiziertes Material nach der Brandschutznorm UL94

It has similar application areas with PVC. It has chemical resistance to acids and bases. It features weldability. Weldability is more difficult than PVC but more resistant weld seams are obtained. It has higher temperature resistance than polyethylene and PVC. Cost is low and economical since its density is very low. It has a high impact resistance. It can be used on section plates. Mechanical strength values are better compared to Polyethylene.

Geschlossenzellige Polyäthylenschäume in vernetzter und unvernetzter Ausführung erhältlich. Raumgewichte: von 20 kg/m³- 110 kg/m³

Kunststoff-Pulver für das Lasersintern basierend auf PA1212 mit Mineralfaser gefüllt Wir sind Hersteller von Polyamiden aus Sebazinsäure, wir nennen das Produkt PA1212-basiertes Pulver. Bauteile aus diesem Pulver weisen sehr ähnliche Eigenschaften, wie das häufig benutzte PA12-Pulver. Unsere Pulver sind auch durch Fällung hergestellt, wodurch sich sehr gute Fließfähigkeiten der Pulver ergeben. Bauteile aus FS3250MF weisen folgende Eigenschaften auf: Modulus: 6100 MPa Tensile Strenght: 51 MPa Elongation at break: 5%

Wir bieten Ihnen eine große Auswahl an Technischen Kunststoffen und ermitteln für Sie den technisch und wirtschaftlich optimalen Kunststoff für Ihre Anforderungen.

Im Bereich Kunststoff-Halbfabrikate bieten wir eine grosse Auswahl an verschiedenen Kunststoffplatten an, welche nach Wunsch in unserer Fertigungsabteilung zugeschnitten, gebohrt, gefräst werden Unser Sortiment im Bereich Kunststoffplatten umfasst alle gängigen Kunststoffe sowie Sondermaterialien und spezielle Ausführungen.

TECASINT 6012 is an unfilled grade for direct forming parts with max. strength and elongation. Lowest modulus and thermal conductivity and optimum electrical properties.

BIEGLO offers high temperature resistant and flame retardant fibers. The application is similiar to meta-aramid, but PI fibers have its own advantages. The long-term service temperature is 260℃. The decomposition temperature is 560℃. The LOI is 38%, it means it is non-flameble fiber. The Dexnyl Polyimide fibers are applicable in many products, but they are used best in niche-applications with extreme standards for the material: 1- FR Protective clothing: e.g. military fligth clothing, flame resistand underwear, firefighter uniform etc. 2- High temperature filtration and industrial insulation: e.g. dedusting filtration for cement factories, steel or powder plants, air filtration for painting area operated at more than 300°C . 3- Composite material: taking advantage of insulation, flame retardance and high emperature resistance, chopped fiber can be used as reinforced material.

Technical plastic : Polyethylene (Short : PE) Product name Polyethylene (PE or sub groups like PE-HD, PE-LD, PE-HMW, PE-UHMW, PE 300, PE 500, PE 1000 or RCH 1000 and many more) Delivery form Sheets, cuts, milled products, base profiles Specification Polyethylene - technical plastic Polyethylene ( Short: PE ) is a technical plastic that can be processed easil. It has a density of about 0,95g/cm³ and with that it's the second least weighing plastic of all technical plastics and just because of that it offers a very interesting price. The moisture absorbtion of PE is about 0,0 %. The material is really good against lyes and acids , has a self-lubricating effect and is easy to mill ( cut, milling, lathe, water jet cutting and welding ). Furthermore it is a great material for abrasive fraught parts in e.g. machine engineering ( PE UHMW ), as inlay for bulk containers or as a cutting boards in the food industry or households. We would like to advise you which kind of PE RG ist the... Product name:Polyethylene (PE or sub groups like PE-HD, PE-LD, PE-HMW, PE-UHMW, PE 300, PE 500, PE 1000 or RCH 10 Delivery form:Sheets, cuts, milled products, base profiles Colors:Standard nature , black, green , other colors possible Regenerate : Standard black and green Thickness:8 - 280 mm (Thickness > 280 mm possible with welding ) Dimensions:3.000 x 2.500 x 8 - 120 mm* 2.000 x 1.000 x 10 - 280 mm or cuts from these standards Surface:smooth or planed, * checker pate surface possible Minimum order quantity:1 Standard sheet Material:New material or Regenerat in PE HD an PE HMW Colors:Standard nature & black , other colors possible Regenerate : Standard black Thickness:1-30 mm Dimension:2.000 x 1.000 mm 3.000 x 1.500 mm Or cuts out of these standards Surface:smooth, structured, with a foil or Regenerate which could have some flaws Minimum order quantity:20 sheets

Exotherme Treibmittel mit unterschiedlichen Wirkstoffen/-gehalten, Gasausbeute und Verarbeitungstemperaturen als Pulver, zur Verschäumung von Thermoplasten im Streich-, Spritzguss- und Extrusionsverfahren. Chemische Treibmittel Treibmittel für die chemische Verschäumung von Kunststoffen und Gummi. WTH-Treibmittel werden allgemein zur Verschäumung von Kunststoffen wie PVC, Polyolefinen wie z.B. PE, PP und Styrolderivaten wie z.B. ABS, PS sowie Elastomeren eingesetzt.

Unser Unternehmen bietet Ihnen ein breitgefächertes Repertoire an flexiblen Elektro-Isolierstoffen für den Elektromaschinen-, Transformatoren- und Generatorenbau an. Diese Produkte kommen außerdem in der Leuchten- und Lampenindustrie sowie in der Medizintechnik zum Einsatz.

Thermoplastik poliolefin (TPO), PE ve PP Karışımı ile özel olarak formüle edilen Su geçirmezlik, Darbeye dayanım, Kimyasallara karşı direnç, Gıdaya teması uygunluk, Ses, Isı, Yanma ve Aşınmaya dirençli polimer ailesinden bir malzemedir. Özellikle Otomotiv Sektöründe Taban Döşemesi ve İç trim parçaların üretiminde kullanılmaktadır. % 100 Geri Dönüşümlü bir malzemedir. Otomotiv ve inşaat sektörlerini ana faaliyet alanları olarak tanımlamıştır. Ekstrüzyon, Kalenderleme, Vakumlama, Poliüretan Enjeksiyon ve CNC Router Kesim teknolojileri kullanılmaktadır.

MFI (g/10 min (230°C/2.16 kg) -2,5- 3,5 Produktform: Granulat 2-5mm Verpackung: Sack 25 kg Preis:0,85/kg Nur 5t. Lager: 42555 Velbert Deutschland

PDM granül kauçuktan üretildiği için oldukça esnek bir maddedir. Bu nedenler her türlü şarta kolaylıkla ayak uydurabilir. Yazın güneşi ya da kışın soğuğu bu malzemeye hiçbir şekilde zarar veremez. Elastik olmasından dolayı darbelere karşı oldukça fazla dayanıklıdır. Elastik olması malzemenin her şekle girmesine de yardımcı olur. Yapısı gereği çok dayanıklı bir ürün olan EPDM granül, öyle hava şartlarına göre değişiklik göstermez. Her duruma dayanıklı olan bu malzemede esneme, genleşme, büzülme gibi olaylar asla yaşanmaz. Bu sayede yaz sıcağında ve kış soğuğunda kolaylıkla kullanılır. EPDM sonradan renklendirilen bir madde değildir. Boyama yöntemi kullanılmayan bu malzemede renk solması gibi bir durum asla yaşanmaz. Yıllarca renkleri bozulmadan kalabilir. Bu malzemede aklınıza gelebilecek her rengi kullanabilirsiniz. Geniş bir renk seçeneğine sahip olan EPDM granül size istediğiniz rengi seçme şansını verecektir.

Erwerben Sie PTFE Platten im Format 2.000 x 1.000 mm in vielen verschiedenen Stärken bis 100 mm. ✓ Exzellente Chemikalienbeständigkeit ✓ Dauergebrauchstemperatur bis zu 260 °C ✓ Hervorragende Gleit-/ Reibungseigenschaften

High-density polyethylene HDPE Low-density polyethylene LDPE Polypropylene PP Polypropylenewith loads ABS Polystyrene PS Polycarbonate PC Metraquilate Polyamides PET PolyoxymethylenePOM

Vous êtes en quête d’une entreprise spécialisée pour la fabrication sur mesure de votre formule de fluorure de calcium pour vos charges spéciales ? Implantée à Cenon-sur-Vienne, notre entreprise Alumines Durmax est celle dont vous avez besoin. Avec un savoir-faire acquis depuis plus de 90 ans, nos techniciens maîtrisent à la perfection la conception et la fabrication de formules spécifiques répondant aux besoins de votre entreprise en fluorure de calcium et à la technicité de vos domaines d’application. Soucieux du travail bien fait, nous veillons à vous fournir des produits de haute pureté (aux alentours de 99,99 % de CaF2). Le fluorure de calcium présente de nombreux avantages et, notamment, le fait qu’il ne soit que très peu attaqué par des réactifs. Il s’applique idéalement aux charges pour usages spéciaux. Tout comme pour sa formule chimique, la granulométrie de votre produit peut être réalisée sur mesure, sur simple demande de votre part.

1)Polyimide Film Based FCCL--3 Layer FCCL 2)Adhesiveless Single-Sided Copper Clad Laminate-- 2 Layer FCCL , 2-layer flexible circuit boards 3)Adhesiveless Double-Sided Copper Clad Laminate-- 2 Layer FCCL 4)Conductive Adhesive Film 5)EMI Shielding Film(Electromagnetic Interference Shielding Film) 6)Ultrathin FCCL 7)Ultra-Thin Peelable Copper Foil 8)Composite Lithium-ion Battery Copper Foil 9)TRF Embedded Resistor Film 10)Very Low Profile Copper Film(HVLP) 11)LCP FCCL(Single Side/Double Side)--2L FCCL Yancheng Tiandi Insulation Co.,Ltd. https://www.polyimide-pi.com/polyimide-fccl.htm hsinsulation@aliyun.com , hsinsulation@hotmail.com Tel :+86-139-61986280 Fax : +86-515-69011600

Auf unserem modern ausgestatteten Maschinenpark mit 12 Spitzgießmaschinen produzieren wir Kunststoffformteile mit einem Schussgewicht von 1g bis 660g.

Diversidade de Plásticos Técnicos de alta qualidade.

Das Gummi NP- Granulat ist frei von kanzerogenen N- Nitrosaminen und Weichmachern.

It is a material with a high resistance to chemicals. Its specific weight is low. It is a slippery material with a low coefficient of friction. The water and moisture absorption property is close to zero. It can be used as cutting plate especially in industrial kitchens and butcher cutting log. It has the ability to be welded. The element that characterizes polyethylene is the molecular weight. Low molecular weight can be grouped into three groups: low molecular weight (PE 300), high molecular weight (PE 500) and ultra high molecular weight (PE 1000).

The unfilled grade TECASINT 5111 natural is based on the high-performance plastic polyimide, which is characterised by its very good thermal stability with low thermal expansion. Polyimides are non-melting polymers with a service temperature of 300 °C, which is considerably higher than that of PEEK or PPS. In addition, TECASINT 5111 natural has a high creep resistance. These properties makes PI plastic ideal for applications where high temperature resistance is required, such as in the aerospace industry. TECASINT 5111 natural has good chemical resistance, especially to light acids and many organic solvents. In combination with the very good electrical insulating properties of the PI material, TECASINT 5111 natural is also perfectly suited for applications in the semiconductor industry, electrical engineering or mechanical engineering. Moreover, the polyimide material has good mechanical properties, good wear resistance and is also resistant to high-energy radiation.

TECASINT 2011 is one of the unfilled natural grades. It has a very high modulus of elasticity, high rigidity and hardness. Compared with TECASINT 1011 it has significantly reduced moisture absorption, higher toughness and better machining properties. Within the TECASINT 2000 series the material has the maximum strength and elongation, together with a high modulus of elasticity and minimal thermal and electrical conductivity. TECASINT 2011 is highly pure with low outgassing in accordance with ESA regulation ECSS Q 70 20.

Compared with the other TECASINT materials the TECASINT 4100 series exhibits extremely high thermal stability, extremely low moisture absorption and high mechanical rigidity. This is accompanied by a very high oxidative stability and increased resistance to chemicals. TECASINT 4111 has a very high thermal stability (HDT/A=470°C). Rigidity and modulus are significantly increased vis a vis conventional polyimides in a temperature range up to 400 °C. The material has minimal thermal and electrical conductivity. The plastic is highly pure with low outgassing in accordance with ESA regulation ECSS Q 70 20.

TECASINT 1011 is an unfilled polyimide natural grade. This material particularly stands out in the TECASINT 1000 product family for very high strength and elongation. It is characterised by properties such as a very high modulus of elasticity, high rigidity, high degree of hardness and low thermal and electrical conductivity. These are accompanied by high purity and low outgassing in accordance with ESA regulation ECSS Q 70 20. Its previous name was SINTIMID Pur HT.

Compared with the other TECASINT materials the TECASINT 4000 series exhibits very low moisture absorption and high oxidative stability along with improved chemical resistance. Despite its high strength, TECASINT 4011 has high elongation at break and toughness. Rigidity and modulus are significantly increased vis a vis conventional polyimides in a temperature range up to 260°C. It also has minimal thermal and electrical conductivity. The plastic is highly pure and displays low outgassing in accordance with ESA regulation ECSS Q 70 20.

PPSU (Polyphenylsulfon) Food Grade, FDA, auch für industrielle Anwendungen wie Fugen und Armaturen, transparent, schöne Eigenfarbe PPSU Food Grade, FDA, auch für industrielle Anwendungen wie Fugen, Armaturen, transparent, schöne Eigenfarbe Seit 2016 importieren wir diese PPSU nach Europa - geeignet für Spritzguss oder ähnliche Prozesse. Erhältlich als Granult - auch PSU und PES.

Starting with the base polymer TECASINT 1011, TECASINT 1031 has been developed. This material contains 40% graphite, unlike the starting material. TECASINT 1031 has a very high resistance to thermal ageing and improved self lubrication. Its other properties include minimised thermal elongation for dimensionally stable components and increased creep strength.

TECASINT 6062 is a highly filled grade for direct forming parts with low static friction. For lubricated and unlubricated tribological applications